[ Home ] [ What's New ] [ Products ] [ Downloads/Manuals ] [ Technical Support ] [ Gallery ] [ Avo News ] [ About/Contact Us ] [ Marketing ] [ Jokes ] [ Plasa Events ] [ Avo Workshops ] [ Movie Gallery ] [ Avo Forum ] [ Subscribe Me ] [ Avo Shop ] [ Avo Hire ] [ Avo Aid ] [ Missing Items ] [ Links ] [ Search ]
 
My Graphics Tablet is Malfunctioning?
 

1212 HR II Graphics Tablet.

1212 HR II Graphics Tablet - the old type.

On the 1212 HR II Graphic Tablet are three status LED's - these indicate the condition of the Tablet.

 Power LED is lit when power is ON
 Sense LED is lit when the stylus is in the working area and within the proximity
 Status LED "Lights" when a button on the stylus is pressed

1212 HR III Graphics Tablet.

1212 HR III Graphics Tablet - the new type.

On the 1212 HR III Graphic Tablet are three status LED's - these indicate the condition of the Tablet.

 Power LED flashes when the tablet has power but the pen is not within the working area.
 Status LED is lit when the stylus is in the working area and within the proximity
 Mode LED "Lights" when a button on the stylus is pressed

Troubleshooting
Before you confirm your tablet does not function properly and decide to send it back to AVOLITES for repair, please go through the following steps:
  • If the Power LED flashes when the stylus is in the working area, then it's very possible that the graphic tablet does not work properly
  • When the Power LED is on and the LED does not flash when the stylus is on the working area, then check and make sure all the connections are secure. If the breakdown is due to disconnection, switch off the desk and connect all the cables firmly and then restart the desk and the graphics tablet.
  • If for any reason the stylus has been unplugged while the graphics tablet is on, we strongly suggest that you press the key "RESET" in order to make it function properly.

Care & Cleaning
As with all electrical equipment, it is necessary to exercise care while handling and cleaning the graphic tablet. Please note the following :-
  • Avoid dropping or knocking the tablet or stylus.
  • To clean the tablet and its accessories, make sure the desk and graphics tablet is switched off.
  • Use a soft cloth lightly damped with water or a non-abrasive cleaner which does not harm plastic components.
  • Do not use chemicals or abrasive materials which may damage the surface.
  • Never immerse any part of the tablet or stylus in any liquid, as this will damage the circuitry inside.

[ Service Repairs ] [ FAQ's ] [ ECN's ] [ Console Faders ] [ Boris3 Motherboard ] [ Illustrations ] [ PAT Testing ] [ Avolites GAL's ]