[ Home ] [ What's New ] [ Products ] [ Downloads/Manuals ] [ Technical Support ] [ Gallery ] [ Avo News ] [ About/Contact Us ] [ Marketing ] [ Jokes ] [ Plasa Events ] [ Avo Workshops ] [ Movie Gallery ] [ Avo Forum ] [ Subscribe Me ] [ Avo Shop ] [ Avo Hire ] [ Avo Aid ] [ Missing Items ] [ Links ] [ Search ]

 

ECN-0137
Title Trimming the links on a Sapphire 2000 SMF pcb.
Equipment Sapphire 2000 consoles with the following serial numbers :- 2117 to 2130
Author Alwyn Fernandes
Drawing No none
Date 20th April 2001

 

Reason for ECN Console locks when pressure is applied to the Master/Memory Fader Panel because links short to drawer cover, especially since this has been raised to improve clearance for the graphic tablet.
Special Parts Required none
Special Tools Required a pair of wire cutters

 

Work Required

The picture below shows where the three links on the SMF boards are located.
All the exposed pins on these links should then be trimmed in half using a standard pair of cutters - see pictures below.


Before trimming


After trimming



Before trimming


After trimming

 

[ Service Repairs ] [ FAQ's ] [ ECN's ] [ Console Faders ] [ Boris3 Motherboard ] [ Illustrations ] [ PAT Testing ] [ Avolites GAL's ]