|
|
ECN-0120 |
| Title |
ART 2000 tray connector change |
| Equipment |
Some ART2000 dimmer trays made during
the early part of 2000 were fitted clear zinc finish D-Type
connectors instead of non pacifated galvanised finish (gold) |
| Author |
J.B.Toby |
| Drawing
No |
n/a |
| Date |
22nd May 2000
|
| Reason
for ECN |
Different connector supplied by manufacturer |
| Special
Parts Required |
D-type spacer - Part
No :-1322-0050AA |
| Special
Tools Required |
none |
|
Work
Required |
- Remove M3 screw and nyloc nut on right side of the D-type connector.
- Loosen left side M3 screw and nyloc nut by 2 mm·
- Carefully pull the connector of the tray and insert spacer between connector and tray·
- Insert right side M3 screw and nyloc nut ·
- While keeping the connector centered
tighten both screws.
- Refit tray in the dimmer and test·
- This concludes this ECN
|
|